What is Mastatest®?
Mastatest® lapbox and cartridges are intended to identify bacteria causing clinical mastitis in dairy cows, and to determine antibiotic sensitivities.
Included with Lapbox
Ethernet (LAN) cable, power adaptor cable, Allen (hex) key for removing lid covers for SD card and cleaning access, antenna and these instructions. Recommend Allen key is taped to the lapbox and these instructions adhered to nearby wall.
Fill a Mastatest® cartridge
![]() |
Take a clean milk sample (see user videos) |
![]() |
Put on clean gloves, and remove cartridge from pack |
![]() |
Remove cartridge lid and half-fill cartridge with milk |
![]() |
Pour off surplus milk and discard |
![]() |
Replace lid, pushing down firmly, and label lid with cow details |
![]() |
Tap firmly 2-3 times, repeating if air-bubbles are visible in wells |
![]() |
Insert cartridge into Lapbox™ with arrows facing to the back and replace lid |
Start a Mastatest®
To Begin:

• Select Lapbox slot used: If first free slot used or scroll
to select and
Option 1: BoxStart
- For Clinical

- For HiSCC


• Select BoxStart
• Input cow number (e.g. 00123) and scroll



Option 2: QuickStart



- For HiSCC




• Input test details to vetoquinol.mastatestsystem.com within 21 hours
Next steps:
Set-up the Mastatest® Lapbox™ in 3 easy steps:
1. INSTALL LAPBOX
• Fold out screen by pulling from underneath (To fold away, push silver buttons either side of Lapbox)
• The default language is English. To change, from the main menu scroll:
-
to Configure Lapbox
,
to Select language
then scroll
to select
- Return to the main menu:
2. REGISTER
• Login, or create an account at vetoquinol.mastatestsystem.com portal.
- Lapbox ID (from the Lapbox main menu,



- Serial number (on rear of Lapbox)
- On Lapbox, select
to return to main menu
3. CHECK CONNECTION
• Check red and green
lightsare showing on the display.
• Scroll down to select Test upload to Cloud then
. If successful, Lapbox is ready to use.
• to return to main menu.
CARE
CONNECT VIA WiFi (NB: ethernet is recommended - see above for connecting via ethernet)
Starting from the Lapbox main menu:
1. Configure for WiFi
- Scroll down
to Configure Lapbox















NB: > –65dBm, and 2.4 GHz WiFi required














-
